H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-30
Description
Use the cd command to change the working path on a remote SFTP server. With the
argument not specified, the command displays the current working path.
 Note:
z You can use the cd .. command to return to the upper-level directory.
z You can use the cd / command to return to the root directory of the system.
Examples
# Change the working path to new1.
sftp-client> cd new1
Current Directory is:
/new1
1.2.3 cdup
Syntax
cdup
View
SFTP client view
Parameters
None
Description
Use the cdup command to return to the upper-level directory.
Examples
# From the current working directory /new1, return to the upper-level directory.
sftp-client> cdup
Current Directory is:
/
1.2.4 delete
Syntax
delete remote-file&<1-10>

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English