H3C S7500E Series Command Manual

Command Manual – MAC Address Table Management
H3C S7500E Series Ethernet Switches
Chapter 1 MAC Address Table Management
Configuration Commands
1-2
Examples
# Display the MAC address table entry for MAC address 00e0-fc01-0101.
<Sysname> display mac-address 00e0-fc01-0101
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00e0-fc01-0101 1 Config static Ethernet2/0/2 NOAGED
--- 1 mac address(es) found ---
Table 1-1 Description on the fields of the display mac-address command
Field Description
MAC ADDR MAC address
VLAN ID ID of the VLAN to which the MAC address belongs
STATE
State of a MAC address, which could be Config static, Config
dynamic, Learned and Blackhole
PORT INDEX
Port number (Displayed as N/A for a blackhole MAC
address)
AGING TIME(s)
Aging time, which could be:
z AGING, indicates that the entry is aging.
z NOAGED, indicates that the entry does not age.
1.1.2 display mac-address aging-time
Syntax
display mac-address aging-time
View
Any view
Parameters
None
Description
Use the display mac-address aging-time command to display the aging time of
dynamic entries in the MAC address table.
Related commands: mac-address (system view), mac-address (Ethernet interface
view), mac-address timer, display mac-address.
Examples
# Display the aging time of dynamic entries in the MAC address table.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English