H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-25
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address auto link-local
1.1.18 ipv6 address eui-64
Syntax
ipv6 address ipv6-address/prefix-length eui-64
undo ipv6 address ipv6-address/prefix-length eui-64
View
Interface view
Parameters
ipv6-address/prefix-length: IPv6 address and IPv6 prefix. The ipv6-address and
prefix-length arguments jointly specify the prefix of an IPv6 address in the EUI-64
format.
Description
Use the ipv6 address eui-64 command to configure a site-local address or global
unicast address in the EUI-64 format for an interface.
Use the undo ipv6 address eui-64 command to remove the configured site-local
address or global unicast address in the EUI-64 format for an interface.
By default, no site-local or global unicast address in EUI-64 format is configured for an
interface.
Examples
# Configure an IPv6 address in EUI-64 format for VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1/64 eui-64
1.1.19 ipv6 address link-local
Syntax
ipv6 address ipv6-address link-local
undo ipv6 address ipv6-address link-local
View
Interface view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English