Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-1
Chapter 1 Basic Configuration Commands
1.1 Basic Configuration Commands
1.1.1 clock datetime
Syntax
clock datetime time date
View
User view
Parameters
time: Current time in the format of HH:MM:SS, where HH is hours in the range 0 to 23,
MM is minutes in the range 0 to 59, and SS is seconds in the range 0 to 59. The zeros
in the argument can be omitted except for indicating 0 hours.
date: Current date in the format of MM/DD/YYYY or YYYY/MM/DD. MM is the month of
the year in the range 1 to 12, DD is the day of the month that varies with months, and
YYYY is a year in the range 2000 to 2035.
Description
Use the clock datetime command to set the current time and date of the device.
The current time and date of the device must be set in an environment that requires the
acquisition of absolute time.
You may choose not to provide seconds when inputting the time parameters.
Related commands: clock summer-time one-off, clock summer-time repeating,
clock timezone, display clock.
Examples
# Set the current system time to 14:10:20 08/01/2005.
<Sysname> clock datetime 14:10:20 8/1/2005
# Set the current system time to 00:06:00 01/01/2007.
<Sysname> clock datetime 0:6 2007/1/1
To Next Page
Loading...
Need help?
General
