Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-5
# Configure the default ISP domain system to use RADIUS accounting scheme rd for
login users and to use the local accounting scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting login radius-scheme rd local
1.1.5 accounting optional
Syntax
accounting optional
undo accounting optional
View
ISP domain view
Parameters
None
Description
Use the accounting optional command to enable the accounting optional feature.
Use the undo accounting optional command to disable the feature.
By default, the feature is disabled.
Note that:
z With the accounting optional command configured, a user that will be
disconnected otherwise can use the network resources even when there is no
available accounting server or the communication with the current accounting
server fails. This command is normally used when authentication is required but
accounting is not.
z If you configure the accounting optional command for a domain, the device does
not send real-time accounting updates for users of the domain any more after
accounting fails.
z With the accounting optional command configured, the limit on the number of
local user connections configured by the attribute access-limit command is not
effective.
Examples
# Enable the accounting optional feature for users in domain aabbcc.net.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] accounting optional
To Next Page
Loading...
Need help?
General
