H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-17
Parameters
basic-community-list-number: Specifies a basic community-list number, in the range 1
to 99.
adv-community-list-number: Specifies an advanced community-list number, in the
range 100 to 199.
whole-match: Displays routes exactly matching the specified
basic-community-list-number.
&<1-16>: Specifies to allow entering the argument before it up to 16 times.
Description
Use the display bgp ipv6 routing-table community-list command to view the routing
information matching the specified IPv6 BGP community list.
Examples
# Display the routing information matching the specified IPv6 BGP community list.
<Sysname> display bgp ipv6 routing-table community-list 99
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Refer to Table 5-5 for description on the fields above.
5.1.18 display bgp ipv6 routing-table dampened
Syntax
display bgp ipv6 routing-table dampened
View
Any view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English