H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-20
Table 2-5 Description on the fields of the display qos policy command
Field Description
Policy Policy name
Classifier Class name and the corresponding configuration information
Behavior
Traffic behavior name and the corresponding configuration
information
2.3.3 display qos policy global
Syntax
display qos policy global { inbound | outbound } [ slot slot-id ]
View
Any view
Parameters
inbound: Displays the QoS policy applied globally in the inbound direction of all ports.
outbound: Displays the QoS policy applied globally in the outbound direction of all
ports.
slot slot-number: Displays the global QoS policy applied on a board. If the slot-number
argument is not specified, the global QoS policy applied on the main control board are
displayed.
Description
Use the display qos policy global command to display information about a global
QoS policy.
Examples
# Display information about the global QoS policy in the inbound direction.
<Sysname> display qos policy global inbound
Direction: Inbound
Policy: test
Classifier: test
Operator: AND
Rule(s) : If-match acl 2000
Behavior: test
Accounting Enable:

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English