H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 4 GARP/GVRP Configuration Commands
4-1
Chapter 4 GARP/GVRP Configuration Commands
4.1 GARP Configuration Commands
4.1.1 display garp statistics
Syntax
display garp statistics [ interface interface-list ]
View
Any view
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
means that you can specify up to 10 port ranges. A port range defined without the to
interface-type interface-number portion comprises only one port.
Description
Use the display garp statistics command to display GARP statistics of specified or all
the ports.
Note that:
z If the interface interface-list keyword-argument combination is not specified, this
command displays the GARP statistics of all the ports.
z If the interface interface-list keyword-argument combination is specified, this
command displays the GARP statistics of the specified ports.
Examples
# Display statistics about GARP for port Ethernet 2/0/1.
<Sysname> display garp statistics interface ethernet2/0/1
GARP statistics on port Ethernet2/0/1
Number of GVRP Frames Received : 0
Number of GVRP Frames Transmitted : 0
Number of Frames Discarded : 0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English