H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands
1-15
Field Description
PoE Input-threshold Upper AC input over-voltage threshold
PoE Output-threshold Lower DC output under-voltage threshold
PoE Output-threshold Upper DC output over-voltage threshold
PoE Hardware Version PoE hardware version number
PoE Software Version PoE software version number
PoE Power Number Number of PoE power supply units
PoE Power Manufacturer Manufacturer of the PoE power
PoE Power Type Type of the PoE power
PoE Power Status
PoE power state:
z Normal
z Absent
z Off
z Master
z Slave
z Balance
z Redundant
z Alarm
z Faulty
1.1.9 display poe-power ac-input state
Syntax
display poe-power ac-input state
View
Any view
Parameters
None
Description
Use the display poe-power ac-input state command to display the state information
of the AC input power.
Examples
# Display the state information of the AC input power.
<Sysname> display poe-power ac-input state
Module Number : 2

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English