H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches Chapter 1 PoE Configuration Commands
1-14
Description
Use the display poe-power command to display the information of the PoE power.
Examples
# Display information of the PoE power.
<Sysname> display poe-power
PoE Current Power : 1870 W
PoE Average Power : 2100 W
PoE Peak Power : 2350 W
PoE Max Power : 2000 W
PoE Nominal Power : 2500 W
PoE Current Current : 3.00 A
PoE Current Voltage : 55.00 V
PoE Input-threshold Lower : 111.22 V
PoE Input-threshold Upper : 131.00 V
PoE Output-threshold Lower : 45.00 V
PoE Output-threshold Upper : 57.00 V
PoE Hardware Version : 0002
PoE Software Version : 0001
PoE Power Number : 2
PoE Power 1:
Manufacturer : Tyco Electronics Com
Type : PSE2500-A
Status : Normal
PoE Power 2:
Manufacturer : Tyco Electronics Com
Type : PSE2500-B
Status : Normal
Table 1-7 Description on the fields of the display poe-power command
Field Description
PoE Current Power Current PoE power
PoE Average Power Average PoE power
PoE Peak Power Peak PoE power
PoE Max Power Maximum PoE power
PoE Nominal Power Nominal PoE power
PoE Current Current Current PoE current
PoE Current Voltage Current PoE voltage
PoE Input-threshold Lower AC input under-voltage threshold

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English