H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 3 Device Management Commands
3-7
CPLD Ver : 002
Slot 2 info:
Status : Normal
Type : LSQ1FV48SA
PCB Ver : VER.C
FPGA Ver : 001
BootRom Ver : 107
CPLD Ver : 004
Chip : 0
Learning Mode: IVL
Chip : 1
Learning Mode: IVL
Table 3-2 Description on the fields of the display device command
Field Description
Slot No. Slot number of a card
Board Type Hardware type of a card
Status Card status
Maximum Ports Maximum number of physical ports that a card supports
Type Type of the current card
Hardware Hardware version of the current card
Driver Driver version of the current card
CPLD CPLD version of the current card
3.1.6 display device manuinfo
Syntax
display device manuinfo [ slot slot-number [ subslot subslot-number ] ]
View
Any view
Parameters
slot slot-number: Displays detailed information of the specified card. The slot-number
argument represents the slot number of a card and the value range varies with devices.
subslot subslot-number: Displays detailed information of the specified subcard. The
subslot-number represents the subslot of a subcard and the value range varies with
devices.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English