H3C S7500E Series Command Manual

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches Chapter 1 Link Aggregation Configuration Commands
1-8
1.1.6 lacp port-priority
Syntax
lacp port-priority port-priority
undo lacp port-priority
View
Ethernet port view
Parameters
port-priority: Port LACP priority, in the range 0 to 65535.
Description
Use the lacp port-priority command to assign an LACP priority to the port.
Use the undo lacp port-priority command to restore the default.
By default, port LACP priority is 32768.
Examples
# Assign LACP priority 64 to a port.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] lacp port-priority 64
1.1.7 lacp system-priority
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Parameters
system-priority: System LACP priority, in the range 0 to 65535.
Description
Use the lacp system-priority command to assign an LACP priority to the local system.
Use the undo lacp system-priority command to restore the default.
By default, system LACP priority is 32768.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English