Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration Commands
2-2
Field Description
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the display rmon command to
view the invalid entry and with the display
current-configuration and display this commands
you cannot view the corresponding rmon commands.)
Samples type The sampling type (absolute in this example)
Variable formula Formula for the sampling value
Sampling interval Sampling interval
Rising threshold
Alarm rising threshold (When the sampling value is
bigger than or equal to this threshold, a rising alarm is
triggered.)
Falling threshold
Alarm falling threshold (When the sampling value is
smaller than or equal to this threshold, a falling alarm is
triggered.)
When startup enables How an alarm can be triggered
Latest value The last sampled value
2.1.2 display rmon event
Syntax
display rmon event [ entry-number ]
View
Any view
Parameters
entry-number: Index of an RMON event entry, in the range 1 to 65535. If no entry is
specified, the configuration of all event entries is displayed.
Description
Use the display rmon event command to display the configuration of the specified or
all RMON event entries.
Displayed information includes event index, event owner, event description, action
triggered by the event (such as sending log or trap messages), and last time the event
occurred (the elapsed time since system initialization/startup) in seconds.
Related commands: rmon event.
To Next Page
Loading...
Need help?
General
