H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-23
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
1.1.28 ssh server compatible-ssh1x enable
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x
View
System view
Parameters
None
Description
Use the ssh server compatible-ssh1x command to enable the SSH server to work
with SSH1.x clients.
Use the undo ssh server compatible-ssh1x command to disable the SSH server
from working with SSH1.x clients.
By default, the SSH server can work with SSH1.x clients.
This configuration takes effect at next login.
Related commands: display ssh server.
Examples
# Enable the SSH server to work with SSH1.x clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
1.1.29 ssh server enable
Syntax
ssh server enable
undo ssh server enable
View
System view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English