Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-3
Related commands: clock datetime, clock summer-time repeating, clock timezone,
display clock.
Examples
# For daylight saving time in abc1 between 06:00:00 on 08/01/2006 and 06:00:00 on
09/01/2006, set the system clock ahead one hour.
<Sysname> clock summer-time abc1 one-off 6 08/01/2006 6 09/01/2006 1
1.1.3 clock summer-time repeating
Syntax
clock summer-time zone-name repeating start-time start-date end-time end-date
add-time
undo clock summer-time
View
User view
Parameters
zone-name: Name of the daylight saving time, a string of 1 to 32 characters.
start-time: Start time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros
in the argument can be omitted except for indicating 0 hours.
start-date: Start date which can be set in two ways:
z Enter the year, month and date at one time, in the format of MM/DD/YYYY
(months/days/years) or YYYY/MM/DD.
z Enter the year, month and date one by one, separated by spaces. The year ranges
from 2000 to 2035; the month can be January, February, March, April, May,
June, July, August, September, October, November or December; the start
week can be the first, second, third, fourth, fifth or last week of the month; the
start date is Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday.
end-time: End time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in
the argument can be omitted except for indicating 0 hours.
end-date: End date which can be set in two ways:
z Enter the year, month and date at one time, in the format of MM/DD/YYYY
(months/days/years) or YYYY/MM/DD.
z Enter the year, month and date one by one, separated by spaces. The year ranges
from 2000 to 2035; the month can be January, February, March, April, May,
June, July, August, September, October, November or December; the end
week can be the first, second, third, fourth, fifth or last week of the month; the
To Next Page
Loading...
Need help?
General
