H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IS-IS Configuration Commands
4-12
Field Description
MI Multi-instance
Resource Name Resource name
MinVal Minimum value
MaxVal Maximum value
CurrVal Current value
ISIS Core License Values License values of ISIS Core
Max Processes Resource Maximum number of processes supported
Max Paths Resource Maximum equal cost paths
Max IPv4 Rt Resource Maximum IPv4 routes supported
Max IPv6 Rt Resource Maximum IPv6 routes supported
4.1.10 display isis lsdb
Syntax
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] | [ lsp-id LSPID | lsp-name lspname ] |
local | verbose ] * [ process-id ]
View
Any view
Parameters
l1, level-1: Specifies level-1 LSDB.
l2, level-2: Specifies level-2 LSDB.
LSPID: LSP ID, in the form of sysid. Pseudo ID-fragment num.
lspname: LSP name, in the form of Symbolic name.[Pseudo ID]-fragment num.
local: Displays LSP information generated locally.
verbose: Displays LSDB detailed information.
process-id: IS-IS process ID, in the range of 1 to 65535.
 Note:
If no level is specified, then both Level-1 and Level-2 (or Level-1-2) link state databases
are displayed by default.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English