H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-29
5.1.30 display bgp routing-table regular-expression
Syntax
display bgp routing-table regular-expression as-regular-expression
View
Any view
Parameters
as-regular-expression: AS regular expression.
Description
Use the display bgp routing-table regular-expression command to display BGP
routing information matching the specified AS regular expression.
Examples
# Display BGP routing information matching AS regular expression 300$.
<Sysname> display bgp routing-table regular-expression 300$
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
Refer to Table 5-6 for description on the fields above.
5.1.31 display bgp routing-table statistic
Syntax
display bgp routing-table statistic
View
Any view
Parameters
None

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English