H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 2 DHCP Relay Agent Configuration
Commands
2-12
Field Description
Type Type of binding, including dynamic and static
Interface
VLAN interface connecting to the DHCP client. If no VLAN
interface is recorded in the binding entry, “N/A” is displayed.
2.1.15 display dhcp relay security statistics
Syntax
display dhcp relay security statistics
View
Any view
Parameters
None
Description
Use the display dhcp relay security statistics command to display statistics
information about bindings of DHCP relay agents.
Examples
# Display statistics about client address binding entries.
<Sysname> display dhcp relay security statistics
Static Items :1
Dynamic Items :0
Temporary Items :0
All Items :1
Table 2-3 Description on fields of the display dhcp relay security statistics command
Field Description
Static Items Static client address binding items
Dynamic Items Dynamic client address binding items
Temporary Items Temporary client address binding items
All Items All client address binding items

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English