H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-15
5.1.15 display bgp ipv6 routing-table as-path-acl
Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number
View
Any view
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display routing
information, ranging from 1 to 256.
Description
Use the display bgp ipv6 routing-table as-path-acl command to display routes
filtered through the specified AS path ACL.
Examples
# Display routes filtered through the AS path ACL 20.
<Sysname> display bgp ipv6 routing-table as-path-acl 20
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Refer to Table 5-5 for description on the fields above.
5.1.16 display bgp ipv6 routing-table community
Syntax
display bgp ipv6 routing-table community [ aa:nn&<1-13> ] [ no-advertise |
no-export | no-export-subconfed ] * [ whole-match ]
View
Any view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English