To Next Page

To Previous Page

Command Manual – AAA RADIUS HWTACACS

H3C S7500E Series Ethernet Switches

Chapter 1 AAA/RADIUS/HWTACACS

Configuration Commands

1-60

1.3 HWTACACS Configuration Commands

1.3.1 data-flow-format

Syntax

data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet

{ giga-packet | kilo-packet | mega-packet | one-packet } }*

undo data-flow-format { data | packet }

View

HWTACACS scheme view

Parameters

data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or

gigabyte.

packet: Specifies the unit for data packets, which can be one-packet, kilo-packet,

mega-packet, or giga-packet.

Description

Use the data-flow-format command to specify the unit for data flows or packets to be

sent to a HWTACACS server.

Use the undo data-flow-format command to restore the default.

By default, the unit for data flows is byte and that for data packets is one-packet.

Related commands: display hwtacacs.

Examples

# Define HWTACACS scheme hwt1 to send data flows and packets destined for the

TACACS server in kilobytes and kilo-packets.

<Sysname> system-view

[Sysname] hwtacacs scheme hwt1

[Sysname- hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet

1.3.2 display hwtacacs

Syntax

display hwtacacs [ hwtacacs-scheme-name [ statistics ] ] [ slot slot-number ]

View

Any view

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series