Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-14
Table 3-8 Description on the fields of the display ospfv3 peer verbose command
Field Description
Neighbor Neighbor ID
interface address Interface address
In the area 0.0.0.2 via interface
vlan-interface 400
Interface VLAN-interface 400 belongs to
area 1.
DR is 4.4.4.4 BDR is 3.3.3.3 DR is 4.4.4.4. BDR is 3.3.3.3
Options is 0x000011 (-|R|-|-|-|V6) The option is 0x000011 (-|R|-|-|-|V6).
Dead timer due in 00:00:35
Dead timer due in 35 seconds
Database Summary List
Number of LSAs sent in DD packet
Link State Request List
Number of LSAs in the link state request list
Link State Retransmission List
Number of LSAs in the link state
retransmission list
3.1.11 display ospfv3 peer statistic
Syntax
display ospfv3 peer statistic
View
Any view
Parameters
None
Description
Use the display ospfv3 peer statistic command to display information about all
OSPFv3 neighbors on the router, that is, numbers of neighbors in different states.
Examples
# Display information about all OSPFv3 neighbors.
<Sysname> display ospfv3 peer statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Neighbor Statistics
----------------------------------------------------------------------
Area ID Down Init 2-way ExStar Exchange Loading Full
0.0.0.0 0 0 0 0 0 0 1
To Next Page
Loading...
Need help?
General
