Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-26
z ftp refers to users using FTP;
z lan-access refers to users accessing the network through an Ethernet, such as
802.1x users;
z ssh refers to users using SSH;
z telnet refers to users using Telnet;
z terminal refers to users logging in through the console port or AUX port
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to remove the specified local users.
By default, no local user is configured.
Related commands: display local-user, service-type.
Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
1.1.26 local-user password-display-mode
Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
Parameters
auto: Displays the password of an accessing user based on the configuration of the
user by using the password command.
cipher-force: Displays the passwords of all accessing users in cipher text.
Description
Use the local-user password-display-mode command to set the password display
mode for all local users.
Use the undo local-user password-display-mode command to restore the default.
The default mode is auto.
With the cipher-force mode configured:
To Next Page
Loading...
Need help?
General
