H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-62
Parameters
as-path-regexp: Clears the flap statistics of routes matching the AS path regular
expression.
as-path-acl-number: Clears the flap statistics of routes matching an AS path ACL,
number of which is in the range 1 to 256.
ip-address: Clears the flap statistics of a route.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
Description
Use the reset bgp flap-info command to clear the flap statistics of routes matching the
specified filter.
The flap statistics of all the routes will be cleared if no parameter is specified.
Examples
# Clear the flap statistics of all routes matching AS path ACL 10.
<Sysname> reset bgp flap-info as-path-acl 10
5.1.75 reset bgp ipv4 all
Syntax
reset bgp ipv4 all
View
User view
Parameters
None
Description
Use the reset bgp ipv4 all command to reset all the BGP connections of IPv4 unicast
address family.
Examples
# Reset all the BGP connections of IPv4 unicast address family.
<Sysname> reset bgp ipv4 all