To Next Page

To Previous Page

Command Manual – IPv4 Routing

H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands

5-8

[Sysname-bgp] peer 10.1.1.1 group Confed38

[Sysname-bgp] group Remote98 external

[Sysname-bgp] peer Remote98 as-number 98

[Sysname-bgp] peer 200.1.1.1 group Remote98

5.1.9 confederation nonstandard

Syntax

confederation nonstandard

undo confederation nonstandard

View

BGP view

Parameters

None

Description

Use the confederation nonstandard command to make the router compatible with

routers not compliant with RFC3065 in the confederation.

Use the undo confederation nonstandard command to restore the default.

By default, all routers in the confederation comply with RFC3065.

All devices should be configured with this command to interact with those nonstandard

devices in the confederation.

Related commands: confederation id and confederation peer-as.

Examples

# AS100 contains routers not compliant with RFC3065 and comprises two sub-ASs,

64000 and 65000.

<Sysname> system-view

[Sysname] bgp 64000

[Sysname-bgp] confederation id 100

[Sysname-bgp] confederation peer-as 65000

[Sysname-bgp] confederation nonstandard

5.1.10 confederation peer-as

Syntax

confederation peer-as as-number-list

undo confederation peer-as [ as-number-list ]

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series