H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-27
Uptime: 03:01:36
Expires: 00:02:29
Table 4-10 Description on the fields of the display pim rp-info command
Field Description
BSR RP Address is IP address of the BSR RP
Group/MaskLen The multicast group served by the RP
RP IP address of the RP
Priority RP priority
HoldTime RP timeout time
Uptime
Length of time for which the RP has been up, in
hours:minutes:seconds
Expires
Length of time in which the RP will expire, in
hours:minutes:seconds
RP mapping for this group
is: 2.2.2.2
The IP address of the RP serving the current
multicast group is 2.2.2.2
4.1.24 hello-option dr-priority
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
View
PIM view
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value
of this argument means a higher priority.
Description
Use the hello-option dr-priority command to configure the global value of the router
priority for DR election.
Use the undo hello-option dr-priority command to restore the system default.
By default, the router priority for DR election is 1.
Related commands: pim hello-option dr-priority.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English