To Next Page

To Previous Page

Command Manual – DHCP

H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands

1-9

Table 1-1 Description on fields of the display dhcp server conflict command

Field Description

Address Conflicted IP address

Discover Time Time when the conflict was discovered

1.1.12 display dhcp server expired

Syntax

display dhcp server expired { all | ip ip-address | pool [ pool-name ] }

View

Any view

Parameters

all: Displays the lease expiration information of all DHCP address pools.

ip ip-address: Displays the lease expiration information of a specified IP address.

pool [ pool-name ]: Displays the lease expiration information of a specified address

pool. The pool name is a string of 1 to 35 characters. If the pool name is not specified,

the lease expiration information of all address pools is displayed.

Description

Use the display dhcp server expired command to display the lease expiration

information of specified DHCP address pool(s) or an IP address.

DHCP will assign these expired IP addresses to DHCP clients after all addresses have

been assigned.

Examples

# Display information about lease expirations in all DHCP address pools.

<Sysname> display dhcp server expired all

Global pool:

IP address Client-identifier/ Lease expiration Type

Hardware address

4.4.4.6 3030-3066-2e65-3230- Apr 25 2007 17:10:47 Release

302e-3130-3234-2d45-

7468-6572-6e65-7430-

2f31

--- total 1 entry ---

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series