Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-23
no-export: Displays routes that are not advertised outside the AS. With a
confederation configured, it displays routes that are not advertised outside the
confederation, but can be advertised to other sub ASs in the confederation.
no-export-subconfed: Displays routes that are neither advertised outside the AS nor
to other sub ASs in a configured confederation.
whole-match: Displays the exactly matched routes.
Description
Use the display bgp routing community command to display BGP routing
information with the specified BGP community.
Examples
# Display routing information with the specified BGP community.
<Sysname> display bgp routing-table community 11:22
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 10.10.10.0/24 0.0.0.0 0 0 i
*> 40.40.40.0/24 20.20.20.1 0 200 300i
Refer to Table 5-6 for description on the fields above.
5.1.24 display bgp routing-table community-list
Syntax
display bgp routing-table community-list { basic-community-list-number
[ whole-match ] | adv-community-list-number }&<1-16>
View
Any view
Parameters
basic-community-list-number: Specifies a basic community-list number from 1 to 99.
adv-community-list-number: Specifies an advanced community-list number from 100 to
199.
whole-match: Displays routes exactly matching the specified basic-community-list.
&<1-16>: Specifies the argument before it can be entered up to 16 times.
To Next Page
Loading...
Need help?
General
