H3C S7500E Series Command Manual

Command Manual – QinQ-BPDU Tunneling
H3C S7500E Series Ethernet Switches Chapter 1 QinQ Configuration Commands
1-7
View
System view
Parameters
policy-name: Policy name, a string of 1 to 31 characters.
Description
Use the qos policy command to create a policy. This command also leads you to
policy view.
Use the undo qos policy command to remove a policy.
To remove a policy that has been applied on a port, remove it from the port first.
Related commands: classifier behavior, qos apply policy.
Examples
# Create the policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1]
1.1.9 traffic behavior
Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
View
System view
Parameters
behavior-name: Behavior name, a string of 1 to 31 characters.
Description
Use the traffic behavior command to create a traffic behavior. This command also
leads you to traffic behavior view.
Use the undo traffic classifier command to remove a traffic behavior.
Related commands: qos policy, qos apply policy, classifier behavior.
Examples
# Create a traffic behavior behavior1.
<Sysname> system-view

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English