H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches Chapter 1 SSH Configuration Commands
1-18
Parameters
None
Description
Use the sftp server enable command to enable SFTP server.
Use the undo sftp server enable command to disable SFTP server.
By default, SFTP server is disabled.
Related commands: display ssh server.
Examples
# Enable SFTP server.
<Sysname> system-view
[Sysname] sftp server enable
1.1.21 sftp server idle-timeout
Syntax
sftp server idle-timeout time-out-value
undo sftp server idle-timeout
View
System view
Parameters
time-out-value: Timeout period in minutes. It ranges from 1 to 35,791.
Description
Use the sftp server idle-timeout command to set the idle timeout period for SFTP user
connections.
Use the undo sftp server idle-timeout command to restore the default.
By default, the idle timeout period is 10 minutes.
Related commands: display ssh server.
Examples
# Set the idle timeout period for SFTP user connections to 500 minutes.
<Sysname> system-view
[Sysname] sftp server idle-timeout 500

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English