H3C S7500E Series

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-2
Description
Use the display snmp-agent community command to display community information
for SNMPv1 or SNMPv2c.
Examples
# Display the information for all the current communities.
<Sysname> display snmp-agent community
Community name: aa
Group name: aa
Acl:2001
Storage-type: nonVolatile
Community name: bb
Group name: bb
Storage-type: nonVolatile
Table 1-1 Descriptions on the fields of display snmp-agent community
Field Description
Community name Community name
Group name SNMP group name
Acl The number of the ACL in use
Storage-type
Storage type, which could be:
z volatile: Information will be lost if the system is rebooted
z nonVolatile: Information will not be lost if the system is
rebooted
z permanent: Modification permitted, but deletion forbidden
z readOnly: Read only, that is, no modification, no deletion
z other: Other storage types
1.1.3 display snmp-agent group
Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameters
group-name: Specifies the SNMP group name, a string of 1 to 32 characters, case
sensitive.