H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 2 DHCP Relay Agent Configuration
Commands
2-13
2.1.16 display dhcp relay security tracker
Syntax
display dhcp relay security tracker
View
Any view
Parameters
None
Description
Use the display dhcp relay security tracker command to display the interval for
refreshing dynamic bindings on the relay agent.
Examples
# Display the interval for refreshing dynamic bindings on the relay agent.
<Sysname> display dhcp relay security tracker
Current tracker interval: 10s (Specified by user)
The interval is 10 seconds.
2.1.17 display dhcp relay server-group
Syntax
display dhcp relay server-group { group-id | all }
View
Any view
Parameters
group-id: Displays the information of the specified DHCP server group numbered from
0 to 19.
all: Displays the information of all DHCP server groups.
Description
Use the display dhcp relay server-group command to display the configuration
information of a specified or all DHCP server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English