H3C S7500E Series

Command Manual – IP Source Guard
H3C S7500E Series Ethernet Switches Chapter 1 IP Source Guard Commands
1-1
Chapter 1 IP Source Guard Commands
1.1 IP Source Guard Commands
1.1.1 display ip check source
Syntax
display ip check source [ interface interface-type interface-number | ip-address
ip-address | mac-address mac-address ]
View
Any view
Parameters
interface interface-type interface-number: Displays the dynamic bindings of the port
specified by its type and number.
ip-address ip-address: Displays the dynamic bindings of an IP address.
mac-address mac-address: Displays the dynamic bindings of an MAC address (in the
format of H-H-H).
Description
Use the display ip check source command to display dynamic bindings.
With no options specified, the command displays the dynamic bindings of all ports.
Related commands: ip check source.
Examples
# Display all dynamic bindings.
<Sysname> display ip check source
The following user address bindings have been configured:
MAC IP Vlan Port Status
0001-0203-0406 192.168.0.1 2 Ethernet2/0/1 DHCP-SNP
0001-0203-0407 192.168.0.2 2 Ethernet2/0/2 DHCP-SNP
-----------------2 binding entries queried, 2 listed------------------