H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-24
Description
Use the display bgp routing-table community-list command to display BGP routing
information matching the specified BGP community list.
Examples
# Display BGP routing information matching BGP community list 100.
<Sysname> display bgp routing-table community-list 100
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 30.30.30.0/24 0.0.0.0 0 0 i
*> 40.40.40.0/24 0.0.0.0 0 0 i
Refer to Table 5-6 for description on the fields above.
5.1.25 display bgp routing-table dampened
Syntax
display bgp routing-table dampened
View
Any view
Parameters
None
Description
Use the display bgp routing-table dampened command to display dampened BGP
routes.
Examples
# Display dampened BGP routes.
<Sysname> display bgp routing-table dampened
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network From Reuse Path/Origin
*d 77.0.0.0 12.1.1.1 00:29:20 100?