Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-3
Description
Use the arp timer aging command to set aging time for dynamic ARP entries.
Use the undo arp timer aging command to restore the default.
Related commands: display arp timer aging.
Examples
# Set aging time for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10
1.1.4 display arp
Syntax
display arp { { all | dynamic | static } [ slot slot-id ] | vlan vlan-id | interface
interface-type interface-number } [ [ verbose ] [ | { begin | exclude | include } string ] |
count ]
View
Any view
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
slot slot-id: Displays the ARP entries of the specified slot.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from
1 to 4,094.
interface interface-type interface-number: Displays the ARP entries of the port
specified by the argument interface-type interface-number.
verbose: Displays detailed information about ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed
information about regular expression, refer to the part discussing CLI display in System
Maintaining and Debugging Configuration.
begin: Displays ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
string: A case-sensitive string for matching, consisting of 1 to 256 characters.
count: Displays the number of ARP entries.
To Next Page
Loading...
Need help?
General
