H3C S7500E Series

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-1
Chapter 1 Information Center Configuration
Commands
1.1 Information Center Configuration Commands
1.1.1 display channel
Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameters
channel-number: Displays information of the channel with a specified number, where
channel-number represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where
channel-name represents the channel name, which could be a default name or a
self-defined name. The user needs to specify a channel name first before using it as a
self-defined channel name. For more information, refer to the info-center channel
name command.
Table 1-1 Information channels for different output destinations
Output destination
Information channel
number
Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP NMS 5 snmpagent
Log file 9 channel9
Description
Use the display channel command to display channel information.