H3C S7500E Series

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-20
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 222:: PrefixLen : 64
NextHop : 122::2 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 100 ?
Refer to Table 5-5 for description on the fields above.
5.1.21 display bgp ipv6 routing-table flap-info
Syntax
display bgp ipv6 routing-table flap-info [ regular-expression as-regular-expression
| as-path-acl as-path-acl-number | ipv6-address [ prefix-length [ longer-match ] ] ]
View
Any view
Parameters
as-regular-expression: AS path regular expression to be matched.
as-path-acl-number: Number of the specified AS path ACL to be matched, ranging from
1 to 256.
ipv6-address: IPv6 address of a route to be displayed.
prefix-length: Prefix length of the IPv6 address, in the range 0 to 128.
longer-match: Matches the longest prefix.
Description
Use the display bgp ipv6 routing-table flap-info command to display IPv6 BGP route
flap statistics.
Examples
# Display IPv6 BGP route flap statistics.
<Sysname> display bgp ipv6 routing-table flap-info
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*d Network : 111:: PrefixLen : 64
From : 122::1 Flaps : 3