H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-21
Field Description
State
IPv6 TCP connection status, including
z Closed
z Listening
z Syn_Sent
z Syn_Rcvd
z Established
z Close_Wait
z Fin_Wait1
z Closing
z Last_Ack
z Fin_Wait2
z Time_Wait
1.1.13 display udp ipv6 statistics
Syntax
display udp ipv6 statistics
View
Any view
Parameters
None
Description
Use the display udp ipv6 statistics command to display statistics of IPv6 UDP
packets.
Examples
# Display statistics information of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English