H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-9
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication default radius-scheme rd local
1.1.9 authentication lan-access
Syntax
authentication lan-access { local | none | radius-scheme radius-scheme-name
[ local ] }
undo authentication lan-access
View
ISP domain view
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the authentication lan-access command to specify the authentication scheme for
LAN access users.
Use the undo authentication login command to restore the default.
By default, the default authentication scheme is used for LAN access users.
Note that the RADIUS scheme specified for the current ISP domain must have been
configured.
Related commands: authentication default, radius scheme.
Examples
# Configure the default ISP domain system to use the local authentication scheme for
LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication lan-access local
# Configure the default ISP domain system to use RADIUS authentication scheme rd
for LAN access users and to use the local authentication scheme as the backup
scheme.
<Sysname> system-view
[Sysname] domain system

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English