H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 5 IPv6 BGP Configuration Commands
5-12
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
Description
Use the display bgp ipv6 peer command to display peer/peer group information.
If no parameter specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP Local router ID : 20.0.0.1
local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
20::21 4 200 17 19 0 3 00:09:59 Established
Table 5-4 Description on the fields of the display bgp ipv6 peer command
Field Description
Peer IPv6 address of the peer
V Peer BGP version
AS AS number
MsgRcvd Messages received
MsgSent Messages sent
OutQ Messages to be sent
PrefRcv Number of prefixes received
Up/Down
The lasting time of a session/the lasting time of present
state (when no session is established)
State Peer state
5.1.14 display bgp ipv6 routing-table
Syntax
display bgp ipv6 routing-table [ ipv6-address prefix-length ]

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English