H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-2
Examples
# Specify the IP address 1.1.1.1, port number 80, shared key aabbcc of the BIMS
server in DHCP address pool 0 for the client.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bims-server ip 1.1.1.1 port 80 sharekey aabbcc
1.1.2 bootfile-name
Syntax
bootfile-name bootfile-name
undo bootfile-name
View
DHCP address pool view
Parameters
bootfile-name: Boot file name, a string of 1 to 63 characters.
Description
Use the bootfile-name command to specify a bootfile name in the DHCP address pool
for the client.
Use the undo bootfile-name command to remove the specified bootfile name
assigned from the DHCP address pool to the DHCP client.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration will
overwrite the previous one.
Examples
# Specify the bootfile name aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa
1.1.3 dhcp enable
Syntax
dhcp enable
undo dhcp enable

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English