H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-35
4.1.35 pim dm
Syntax
pim dm
undo pim dm
View
Interface view
Parameters
None
Description
Use the pim dm command to enable PIM-DM.
Use the undo pim dm command to disable PIM-DM.
By default, PIM-DM is disabled.
Note that PIM-DM cannot be used for multicast groups in the SSM group range.
Related commands: pim sm, ssm-policy.
Examples
# Enable PIM-DM on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim dm
4.1.36 pim hello-option dr-priority
Syntax
pim hello-option dr-priority priority
undo pim hello-option dr-priority
View
Interface view
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value
of this argument means a higher priority.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English