Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-6
Examples
# Create a class named class 1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
2.2 Traffic Behavior Configuration Commands
2.2.1 accounting
Syntax
accounting
undo accounting
View
Traffic behavior view
Parameters
None
Description
Use the accounting command to configure the traffic accounting action for a traffic
behavior.
Use the undo accounting command to remove the traffic accounting action.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the traffic accounting action for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] accounting
2.2.2 car
Syntax
car cir committed-information-rate [ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ pir peak-information-rate ] [ green action ] [ red action ] [ yellow
action ]
undo car