H3C S7500E Series

Command Manual – NTP
H3C S7500E Series Ethernet Switches Chapter 1 NTP Configuration Commands
1-1
Chapter 1 NTP Configuration Commands
1.1 NTP Configuration Commands
1.1.1 display ntp-service sessions
Syntax
display ntp-service sessions [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of all NTP sessions.
Description
Use the display ntp-service sessions command to view the information of all NTP
sessions. Without the verbose keyword, this command will display only the brief
information of all NTP service sessions.
Examples
# View the brief information of NTP service sessions.
<Sysname> display ntp-service sessions
source reference stra reach poll now offset delay disper
**************************************************************************
[12345]192.168.0.65 127.127.1.0 2 1 64 - -9.7 18.8 0.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations : 1