Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-27
Request list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 1.1.1.1 80000004 1
Network 192.168.0.1 1.1.1.1 80000003 1
Sum-Net 192.168.1.0 1.1.1.1 80000002 2
Table 3-13 Description on the fields of the display ospf request queue command
Field Description
The Router's Neighbor is Router ID Neighbor router ID
Address Neighbor interface IP address
Interface Local interface IP address
Area Area ID
Request list Request list information
Type LSA type
LinkState ID Link state ID
AdvRouter Advertising router
Sequence LSA sequence number
Age LSA age
3.1.21 display ospf retrans-queue
Syntax
display ospf [ process-id ] retrans-queue [ interface-type interface-number ]
[ neighbor-id ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
interface-type interface-number: Interface type and interface number.
neighbor-id: Neighbor’s router ID.
Description
Use the display ospf retrans-queue command to display retransmission queue
information.