Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-14
Parameters
local: Performs local authorization.
none: Does not perform any authorization. In this case, an authenticated user is
automatically authorized with the default right.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the authorization lan-access command to specify the authorization scheme for
LAN access users.
Use the undo authorization lan-access command to restore the default.
By default, the default authorization scheme is used for LAN access users.
Note that the RADIUS scheme specified for the current ISP domain must have been
configured.
Related commands: authorization default, radius scheme.
Examples
# Configure the default ISP domain system to use the local authorization scheme for
LAN access users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system]authorization lan-access local
# Configure the default ISP domain system to use RADIUS authorization scheme rd
for LAN access users and to use the local authorization scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization lan-access radius-scheme rd local
1.1.15 authorization login
Syntax
authorization login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name [ local ] }
undo authorization login
View
ISP domain view
To Next Page
Loading...
Need help?
General
