H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 2 RMON Configuration Commands
2-7
Variable formula :
((.1.3.6.1.2.1.16.1.1.1.5.1-.1.3.6.1.2.1.16.1.1.1.6.1)*100/.1.3.6.1.2.1.16
.1.1.1.5.1)
Description : ifUtilization. Ethernet 2/0/1
Sampling interval : 10(sec)
Rising threshold : 892340484(linked with event 1)
Falling threshold : 889783312(linked with event 2)
When startup enables : risingOrFallingAlarm
This entry will exist : forever
Latest value : 0
Table 2-5 Description on the fields of the display rmon prialarm command
Field Description
Prialarm table Index of the prialarm table
owned by Owner of the entry, user1 in this example
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means invalid.
You can use the display rmon command to view the
invalid entry and with the display current-configuration
and display this commands you cannot view the
corresponding rmon commands.)
Samples type Samples type
Variable formula Variable formula
Sampling interval Sampling interval
Rising threshold
Alarm rising threshold. An alarm event is triggered when
the sampled value is greater than or equal to this
threshold.
Falling threshold
Alarm falling threshold. An alarm event is triggered when
the sampled value is less than or equal to this threshold.
linked with event Event index associated with the prialarm
When startup enables How can an alarm be triggered
This entry will exist
The lifetime of the entry, which can be forever or span the
specified period
Latest value The last sampled value
2.1.6 display rmon statistics
Syntax
display rmon statistics [ interface-type interface-number ]

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English