H3C S7500E Series

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-15
1.1.13 info-center logfile frequency
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
View
System view
Parameters
freq-sec: Frequency with which the system saves the log file, in the range 1 to 86,400
seconds, defaults to 86400 seconds.
Description
Use the info-center logfile frequency command to configure the frequency with
which the system saves the log file.
Use the undo info-center logfile frequency command to restore the default
frequency.
Examples
# Configure the frequency with which the system saves the log file as 60,000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
1.1.14 info-center logfile size-quota
Syntax
info-center logfile size-quota size
undo info-center logfile size-quota
View
System view
Parameters
size: The maximum capacity of a disk, in MB, in the range 1 MB to 10 MB, defaults to 1
MB.
Description
Use the info-center logfile size-quota command to set the maximum storage space
reserved for a log file.