H3C S7500E Series

Command Manual – QoS
H3C S7500E Series Ethernet Switches Chapter 2 QoS Policy Configuration Commands
2-19
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier database behavior test
2.3.2 display qos policy
Syntax
display qos policy user-defined [ policy-name [ classifier classifier-name ] ]
View
Any view
Parameters
policy-name: Policy name. If it is not provided, the configuration of all the user defined
policies is displayed.
classifier-name: Name of a class in the policy. If it is not provided, all the classes in the
policy are specified.
Description
Use the display qos policy command to display the configuration of a specified policy,
including the configuration of the classes and the associated traffic behaviors in the
policy.
Examples
# Display the configuration of all the user specified policies.
<Sysname> display qos policy user-defined
User Defined QoS Policy Information:
Policy: test
Classifier: test
Behavior: test
Accounting Enable
Committed Access Rate:
CIR 64 (kbps), CBS 4000 (byte), EBS 4000 (byte), PIR 640 (kbps)
Green Action: pass
Red Action: discard
Yellow Action: pass