H3C S7500E Series

Command Manual – DNS
H3C S7500E Series Ethernet Switches Chapter 1 DNS Configuration Commands
1-1
Chapter 1 DNS Configuration Commands
 Note:
This document only covers IPv4 DNS configuration commands. For introduction to
IPv6 DNS configuration commands, refer to IPv6 Commands.
1.1 DNS Configuration Commands
1.1.1 display dns domain
Syntax
display dns domain [ dynamic ]
View
Any view
Parameters
dynamic: Displays the domain name suffixes dynamically obtained through DHCP or
other protocols.
Description
Use the display dns domain command to display the domain name suffixes.
Related commands: dns domain.
Examples
# Display domain name suffixes.
<Sysname> display dns domain
Type:
D:Dynamic S:Static
No. Type Domain-name
1 S com