H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches Chapter 1 SNMP Configuration Commands
1-1
Chapter 1 SNMP Configuration Commands
1.1 SNMP Configuration Commands
1.1.1 display snmp-agent local-engineid
Syntax
display snmp-agent local-engineid
View
Any view
Parameters
None
Description
Use the display snmp-agent local-engineid command to display the local SNMP
agent engine ID.
SNMP engine ID identifies an SNMP entity uniquely within an SNMP domain. SNMP
engine is an indispensable part of an SNMP entity. It provides the SNMP message
allocation, message handling, authentication, and access control.
Examples
# Display the local SNMP agent engine ID.
<Sysname> display snmp-agent local-engineid
SNMP local EngineID: 000063A27F000001000071DA
1.1.2 display snmp-agent community
Syntax
display snmp-agent community [ read | write ]
View
Any view
Parameters
read: Displays the information of communities with read-only access right.
write: Displays the information of communities with read and write access right.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English